Package com.google.cloud.securitycenter.v1beta1

Class GroupAssetsRequest.Builder

  • All Implemented Interfaces:
    GroupAssetsRequestOrBuilder, com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, Cloneable
    Enclosing class:
    GroupAssetsRequest
    public static final class GroupAssetsRequest.Builder
extends com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>
implements GroupAssetsRequestOrBuilder
     Request message for grouping by assets.
    Protobuf type google.cloud.securitycenter.v1beta1.GroupAssetsRequest

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • clear

        public GroupAssetsRequest.Builder clear()
        Specified by:
        clear in interface com.google.protobuf.Message.Builder
        Specified by:
        clear in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clear in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • getDefaultInstanceForType

        public GroupAssetsRequest getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public GroupAssetsRequest build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public GroupAssetsRequest buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • clone

        public GroupAssetsRequest.Builder clone()
        Specified by:
        clone in interface com.google.protobuf.Message.Builder
        Specified by:
        clone in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clone in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • setField

        public GroupAssetsRequest.Builder setField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                           Object value)
        Specified by:
        setField in interface com.google.protobuf.Message.Builder
        Overrides:
        setField in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • clearField

        public GroupAssetsRequest.Builder clearField​(com.google.protobuf.Descriptors.FieldDescriptor field)
        Specified by:
        clearField in interface com.google.protobuf.Message.Builder
        Overrides:
        clearField in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • clearOneof

        public GroupAssetsRequest.Builder clearOneof​(com.google.protobuf.Descriptors.OneofDescriptor oneof)
        Specified by:
        clearOneof in interface com.google.protobuf.Message.Builder
        Overrides:
        clearOneof in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • setRepeatedField

        public GroupAssetsRequest.Builder setRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                   int index,
                                                   Object value)
        Specified by:
        setRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        setRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • addRepeatedField

        public GroupAssetsRequest.Builder addRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                   Object value)
        Specified by:
        addRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        addRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • mergeFrom

        public GroupAssetsRequest.Builder mergeFrom​(com.google.protobuf.Message other)
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<GroupAssetsRequest.Builder>

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • mergeFrom

        public GroupAssetsRequest.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                            com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                                     throws IOException
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Specified by:
        mergeFrom in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<GroupAssetsRequest.Builder>
        Throws:
        IOException

      • getParent

        public String getParent()
         Required. Name of the organization to groupBy. Its format is
 "organizations/[organization_id]".
        string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }
        Specified by:
        getParent in interface GroupAssetsRequestOrBuilder
        Returns:
        The parent.

      • getParentBytes

        public com.google.protobuf.ByteString getParentBytes()
         Required. Name of the organization to groupBy. Its format is
 "organizations/[organization_id]".
        string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }
        Specified by:
        getParentBytes in interface GroupAssetsRequestOrBuilder
        Returns:
        The bytes for parent.

      • setParent

        public GroupAssetsRequest.Builder setParent​(String value)
         Required. Name of the organization to groupBy. Its format is
 "organizations/[organization_id]".
        string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }
        Parameters:
        value - The parent to set.
        Returns:
        This builder for chaining.

      • clearParent

        public GroupAssetsRequest.Builder clearParent()
         Required. Name of the organization to groupBy. Its format is
 "organizations/[organization_id]".
        string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }
        Returns:
        This builder for chaining.

      • setParentBytes

        public GroupAssetsRequest.Builder setParentBytes​(com.google.protobuf.ByteString value)
         Required. Name of the organization to groupBy. Its format is
 "organizations/[organization_id]".
        string parent = 1 [(.google.api.field_behavior) = REQUIRED, (.google.api.resource_reference) = { ... }
        Parameters:
        value - The bytes for parent to set.
        Returns:
        This builder for chaining.

      • getFilter

        public String getFilter()
         Expression that defines the filter to apply across assets.
 The expression is a list of zero or more restrictions combined via logical
 operators `AND` and `OR`.
 Parentheses are not supported, and `OR` has higher precedence than `AND`.

 Restrictions have the form `<field> <operator> <value>` and may have a `-`
 character in front of them to indicate negation. The fields map to those
 defined in the Asset resource. Examples include:

 * name
 * security_center_properties.resource_name
 * resource_properties.a_property
 * security_marks.marks.marka

 The supported operators are:

 * `=` for all value types.
 * `>`, `<`, `>=`, `<=` for integer values.
 * `:`, meaning substring matching, for strings.

 The supported value types are:

 * string literals in quotes.
 * integer literals without quotes.
 * boolean literals `true` and `false` without quotes.

 For example, `resource_properties.size = 100` is a valid filter string.
        string filter = 2;
        Specified by:
        getFilter in interface GroupAssetsRequestOrBuilder
        Returns:
        The filter.

      • getFilterBytes

        public com.google.protobuf.ByteString getFilterBytes()
         Expression that defines the filter to apply across assets.
 The expression is a list of zero or more restrictions combined via logical
 operators `AND` and `OR`.
 Parentheses are not supported, and `OR` has higher precedence than `AND`.

 Restrictions have the form `<field> <operator> <value>` and may have a `-`
 character in front of them to indicate negation. The fields map to those
 defined in the Asset resource. Examples include:

 * name
 * security_center_properties.resource_name
 * resource_properties.a_property
 * security_marks.marks.marka

 The supported operators are:

 * `=` for all value types.
 * `>`, `<`, `>=`, `<=` for integer values.
 * `:`, meaning substring matching, for strings.

 The supported value types are:

 * string literals in quotes.
 * integer literals without quotes.
 * boolean literals `true` and `false` without quotes.

 For example, `resource_properties.size = 100` is a valid filter string.
        string filter = 2;
        Specified by:
        getFilterBytes in interface GroupAssetsRequestOrBuilder
        Returns:
        The bytes for filter.

      • setFilter

        public GroupAssetsRequest.Builder setFilter​(String value)
         Expression that defines the filter to apply across assets.
 The expression is a list of zero or more restrictions combined via logical
 operators `AND` and `OR`.
 Parentheses are not supported, and `OR` has higher precedence than `AND`.

 Restrictions have the form `<field> <operator> <value>` and may have a `-`
 character in front of them to indicate negation. The fields map to those
 defined in the Asset resource. Examples include:

 * name
 * security_center_properties.resource_name
 * resource_properties.a_property
 * security_marks.marks.marka

 The supported operators are:

 * `=` for all value types.
 * `>`, `<`, `>=`, `<=` for integer values.
 * `:`, meaning substring matching, for strings.

 The supported value types are:

 * string literals in quotes.
 * integer literals without quotes.
 * boolean literals `true` and `false` without quotes.

 For example, `resource_properties.size = 100` is a valid filter string.
        string filter = 2;
        Parameters:
        value - The filter to set.
        Returns:
        This builder for chaining.

      • clearFilter

        public GroupAssetsRequest.Builder clearFilter()
         Expression that defines the filter to apply across assets.
 The expression is a list of zero or more restrictions combined via logical
 operators `AND` and `OR`.
 Parentheses are not supported, and `OR` has higher precedence than `AND`.

 Restrictions have the form `<field> <operator> <value>` and may have a `-`
 character in front of them to indicate negation. The fields map to those
 defined in the Asset resource. Examples include:

 * name
 * security_center_properties.resource_name
 * resource_properties.a_property
 * security_marks.marks.marka

 The supported operators are:

 * `=` for all value types.
 * `>`, `<`, `>=`, `<=` for integer values.
 * `:`, meaning substring matching, for strings.

 The supported value types are:

 * string literals in quotes.
 * integer literals without quotes.
 * boolean literals `true` and `false` without quotes.

 For example, `resource_properties.size = 100` is a valid filter string.
        string filter = 2;
        Returns:
        This builder for chaining.

      • setFilterBytes

        public GroupAssetsRequest.Builder setFilterBytes​(com.google.protobuf.ByteString value)
         Expression that defines the filter to apply across assets.
 The expression is a list of zero or more restrictions combined via logical
 operators `AND` and `OR`.
 Parentheses are not supported, and `OR` has higher precedence than `AND`.

 Restrictions have the form `<field> <operator> <value>` and may have a `-`
 character in front of them to indicate negation. The fields map to those
 defined in the Asset resource. Examples include:

 * name
 * security_center_properties.resource_name
 * resource_properties.a_property
 * security_marks.marks.marka

 The supported operators are:

 * `=` for all value types.
 * `>`, `<`, `>=`, `<=` for integer values.
 * `:`, meaning substring matching, for strings.

 The supported value types are:

 * string literals in quotes.
 * integer literals without quotes.
 * boolean literals `true` and `false` without quotes.

 For example, `resource_properties.size = 100` is a valid filter string.
        string filter = 2;
        Parameters:
        value - The bytes for filter to set.
        Returns:
        This builder for chaining.

      • getGroupBy

        public String getGroupBy()
         Required. Expression that defines what assets fields to use for grouping. The string
 value should follow SQL syntax: comma separated list of fields. For
 example:
 "security_center_properties.resource_project,security_center_properties.project".

 The following fields are supported when compare_duration is not set:

 * security_center_properties.resource_project
 * security_center_properties.resource_type
 * security_center_properties.resource_parent

 The following fields are supported when compare_duration is set:

 * security_center_properties.resource_type
        string group_by = 3 [(.google.api.field_behavior) = REQUIRED];
        Specified by:
        getGroupBy in interface GroupAssetsRequestOrBuilder
        Returns:
        The groupBy.

      • getGroupByBytes

        public com.google.protobuf.ByteString getGroupByBytes()
         Required. Expression that defines what assets fields to use for grouping. The string
 value should follow SQL syntax: comma separated list of fields. For
 example:
 "security_center_properties.resource_project,security_center_properties.project".

 The following fields are supported when compare_duration is not set:

 * security_center_properties.resource_project
 * security_center_properties.resource_type
 * security_center_properties.resource_parent

 The following fields are supported when compare_duration is set:

 * security_center_properties.resource_type
        string group_by = 3 [(.google.api.field_behavior) = REQUIRED];
        Specified by:
        getGroupByBytes in interface GroupAssetsRequestOrBuilder
        Returns:
        The bytes for groupBy.

      • setGroupBy

        public GroupAssetsRequest.Builder setGroupBy​(String value)
         Required. Expression that defines what assets fields to use for grouping. The string
 value should follow SQL syntax: comma separated list of fields. For
 example:
 "security_center_properties.resource_project,security_center_properties.project".

 The following fields are supported when compare_duration is not set:

 * security_center_properties.resource_project
 * security_center_properties.resource_type
 * security_center_properties.resource_parent

 The following fields are supported when compare_duration is set:

 * security_center_properties.resource_type
        string group_by = 3 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The groupBy to set.
        Returns:
        This builder for chaining.

      • clearGroupBy

        public GroupAssetsRequest.Builder clearGroupBy()
         Required. Expression that defines what assets fields to use for grouping. The string
 value should follow SQL syntax: comma separated list of fields. For
 example:
 "security_center_properties.resource_project,security_center_properties.project".

 The following fields are supported when compare_duration is not set:

 * security_center_properties.resource_project
 * security_center_properties.resource_type
 * security_center_properties.resource_parent

 The following fields are supported when compare_duration is set:

 * security_center_properties.resource_type
        string group_by = 3 [(.google.api.field_behavior) = REQUIRED];
        Returns:
        This builder for chaining.

      • setGroupByBytes

        public GroupAssetsRequest.Builder setGroupByBytes​(com.google.protobuf.ByteString value)
         Required. Expression that defines what assets fields to use for grouping. The string
 value should follow SQL syntax: comma separated list of fields. For
 example:
 "security_center_properties.resource_project,security_center_properties.project".

 The following fields are supported when compare_duration is not set:

 * security_center_properties.resource_project
 * security_center_properties.resource_type
 * security_center_properties.resource_parent

 The following fields are supported when compare_duration is set:

 * security_center_properties.resource_type
        string group_by = 3 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The bytes for groupBy to set.
        Returns:
        This builder for chaining.

      • hasCompareDuration

        public boolean hasCompareDuration()
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;
        Specified by:
        hasCompareDuration in interface GroupAssetsRequestOrBuilder
        Returns:
        Whether the compareDuration field is set.

      • getCompareDuration

        public com.google.protobuf.Duration getCompareDuration()
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;
        Specified by:
        getCompareDuration in interface GroupAssetsRequestOrBuilder
        Returns:
        The compareDuration.

      • setCompareDuration

        public GroupAssetsRequest.Builder setCompareDuration​(com.google.protobuf.Duration value)
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;

      • setCompareDuration

        public GroupAssetsRequest.Builder setCompareDuration​(com.google.protobuf.Duration.Builder builderForValue)
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;

      • mergeCompareDuration

        public GroupAssetsRequest.Builder mergeCompareDuration​(com.google.protobuf.Duration value)
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;

      • clearCompareDuration

        public GroupAssetsRequest.Builder clearCompareDuration()
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;

      • getCompareDurationBuilder

        public com.google.protobuf.Duration.Builder getCompareDurationBuilder()
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;

      • getCompareDurationOrBuilder

        public com.google.protobuf.DurationOrBuilder getCompareDurationOrBuilder()
         When compare_duration is set, the Asset's "state" property is updated to
 indicate whether the asset was added, removed, or remained present during
 the compare_duration period of time that precedes the read_time. This is
 the time between (read_time - compare_duration) and read_time.

 The state value is derived based on the presence of the asset at the two
 points in time. Intermediate state changes between the two times don't
 affect the result. For example, the results aren't affected if the asset is
 removed and re-created again.

 Possible "state" values when compare_duration is specified:

 * "ADDED": indicates that the asset was not present before
              compare_duration, but present at reference_time.
 * "REMOVED": indicates that the asset was present at the start of
              compare_duration, but not present at reference_time.
 * "ACTIVE": indicates that the asset was present at both the
              start and the end of the time period defined by
              compare_duration and reference_time.

 This field is ignored if `state` is not a field in `group_by`.
        .google.protobuf.Duration compare_duration = 4;
        Specified by:
        getCompareDurationOrBuilder in interface GroupAssetsRequestOrBuilder

      • hasReadTime

        public boolean hasReadTime()
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;
        Specified by:
        hasReadTime in interface GroupAssetsRequestOrBuilder
        Returns:
        Whether the readTime field is set.

      • getReadTime

        public com.google.protobuf.Timestamp getReadTime()
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;
        Specified by:
        getReadTime in interface GroupAssetsRequestOrBuilder
        Returns:
        The readTime.

      • setReadTime

        public GroupAssetsRequest.Builder setReadTime​(com.google.protobuf.Timestamp value)
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;

      • setReadTime

        public GroupAssetsRequest.Builder setReadTime​(com.google.protobuf.Timestamp.Builder builderForValue)
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;

      • mergeReadTime

        public GroupAssetsRequest.Builder mergeReadTime​(com.google.protobuf.Timestamp value)
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;

      • clearReadTime

        public GroupAssetsRequest.Builder clearReadTime()
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;

      • getReadTimeBuilder

        public com.google.protobuf.Timestamp.Builder getReadTimeBuilder()
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;

      • getReadTimeOrBuilder

        public com.google.protobuf.TimestampOrBuilder getReadTimeOrBuilder()
         Time used as a reference point when filtering assets. The filter is limited
 to assets existing at the supplied time and their values are those at that
 specific time. Absence of this field will default to the API's version of
 NOW.
        .google.protobuf.Timestamp read_time = 5;
        Specified by:
        getReadTimeOrBuilder in interface GroupAssetsRequestOrBuilder

      • getPageToken

        public String getPageToken()
         The value returned by the last `GroupAssetsResponse`; indicates
 that this is a continuation of a prior `GroupAssets` call, and that the
 system should return the next page of data.
        string page_token = 7;
        Specified by:
        getPageToken in interface GroupAssetsRequestOrBuilder
        Returns:
        The pageToken.

      • getPageTokenBytes

        public com.google.protobuf.ByteString getPageTokenBytes()
         The value returned by the last `GroupAssetsResponse`; indicates
 that this is a continuation of a prior `GroupAssets` call, and that the
 system should return the next page of data.
        string page_token = 7;
        Specified by:
        getPageTokenBytes in interface GroupAssetsRequestOrBuilder
        Returns:
        The bytes for pageToken.

      • setPageToken

        public GroupAssetsRequest.Builder setPageToken​(String value)
         The value returned by the last `GroupAssetsResponse`; indicates
 that this is a continuation of a prior `GroupAssets` call, and that the
 system should return the next page of data.
        string page_token = 7;
        Parameters:
        value - The pageToken to set.
        Returns:
        This builder for chaining.

      • clearPageToken

        public GroupAssetsRequest.Builder clearPageToken()
         The value returned by the last `GroupAssetsResponse`; indicates
 that this is a continuation of a prior `GroupAssets` call, and that the
 system should return the next page of data.
        string page_token = 7;
        Returns:
        This builder for chaining.

      • setPageTokenBytes

        public GroupAssetsRequest.Builder setPageTokenBytes​(com.google.protobuf.ByteString value)
         The value returned by the last `GroupAssetsResponse`; indicates
 that this is a continuation of a prior `GroupAssets` call, and that the
 system should return the next page of data.
        string page_token = 7;
        Parameters:
        value - The bytes for pageToken to set.
        Returns:
        This builder for chaining.

      • getPageSize

        public int getPageSize()
         The maximum number of results to return in a single response. Default is
 10, minimum is 1, maximum is 1000.
        int32 page_size = 8;
        Specified by:
        getPageSize in interface GroupAssetsRequestOrBuilder
        Returns:
        The pageSize.

      • setPageSize

        public GroupAssetsRequest.Builder setPageSize​(int value)
         The maximum number of results to return in a single response. Default is
 10, minimum is 1, maximum is 1000.
        int32 page_size = 8;
        Parameters:
        value - The pageSize to set.
        Returns:
        This builder for chaining.

      • clearPageSize

        public GroupAssetsRequest.Builder clearPageSize()
         The maximum number of results to return in a single response. Default is
 10, minimum is 1, maximum is 1000.
        int32 page_size = 8;
        Returns:
        This builder for chaining.

      • setUnknownFields

        public final GroupAssetsRequest.Builder setUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        setUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        setUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>

      • mergeUnknownFields

        public final GroupAssetsRequest.Builder mergeUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        mergeUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<GroupAssetsRequest.Builder>