Package com.google.cloud.compute.v1

Class ListNodesNodeGroupsRequest.Builder

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<ListNodesNodeGroupsRequest.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<ListNodesNodeGroupsRequest.Builder>

      • getDefaultInstanceForType

        public ListNodesNodeGroupsRequest getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public ListNodesNodeGroupsRequest build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public ListNodesNodeGroupsRequest buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<ListNodesNodeGroupsRequest.Builder>

      • mergeFrom

        public ListNodesNodeGroupsRequest.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                                    com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                                             throws IOException
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Specified by:
        mergeFrom in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<ListNodesNodeGroupsRequest.Builder>
        Throws:
        IOException

      • hasFilter

        public boolean hasFilter()
         A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
        optional string filter = 336120696;
        Specified by:
        hasFilter in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        Whether the filter field is set.

      • getFilter

        public String getFilter()
         A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
        optional string filter = 336120696;
        Specified by:
        getFilter in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The filter.

      • getFilterBytes

        public com.google.protobuf.ByteString getFilterBytes()
         A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
        optional string filter = 336120696;
        Specified by:
        getFilterBytes in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The bytes for filter.

      • setFilter

        public ListNodesNodeGroupsRequest.Builder setFilter​(String value)
         A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
        optional string filter = 336120696;
        Parameters:
        value - The filter to set.
        Returns:
        This builder for chaining.

      • clearFilter

        public ListNodesNodeGroupsRequest.Builder clearFilter()
         A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
        optional string filter = 336120696;
        Returns:
        This builder for chaining.

      • setFilterBytes

        public ListNodesNodeGroupsRequest.Builder setFilterBytes​(com.google.protobuf.ByteString value)
         A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:` operator can be used with string fields to match substrings. For non-string fields it is equivalent to the `=` operator. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`.
        optional string filter = 336120696;
        Parameters:
        value - The bytes for filter to set.
        Returns:
        This builder for chaining.

      • hasMaxResults

        public boolean hasMaxResults()
         The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
        optional uint32 max_results = 54715419;
        Specified by:
        hasMaxResults in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        Whether the maxResults field is set.

      • getMaxResults

        public int getMaxResults()
         The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
        optional uint32 max_results = 54715419;
        Specified by:
        getMaxResults in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The maxResults.

      • setMaxResults

        public ListNodesNodeGroupsRequest.Builder setMaxResults​(int value)
         The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
        optional uint32 max_results = 54715419;
        Parameters:
        value - The maxResults to set.
        Returns:
        This builder for chaining.

      • clearMaxResults

        public ListNodesNodeGroupsRequest.Builder clearMaxResults()
         The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
        optional uint32 max_results = 54715419;
        Returns:
        This builder for chaining.

      • getNodeGroup

        public String getNodeGroup()
         Name of the NodeGroup resource whose nodes you want to list.
        string node_group = 469958146 [(.google.api.field_behavior) = REQUIRED];
        Specified by:
        getNodeGroup in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The nodeGroup.

      • getNodeGroupBytes

        public com.google.protobuf.ByteString getNodeGroupBytes()
         Name of the NodeGroup resource whose nodes you want to list.
        string node_group = 469958146 [(.google.api.field_behavior) = REQUIRED];
        Specified by:
        getNodeGroupBytes in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The bytes for nodeGroup.

      • setNodeGroup

        public ListNodesNodeGroupsRequest.Builder setNodeGroup​(String value)
         Name of the NodeGroup resource whose nodes you want to list.
        string node_group = 469958146 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The nodeGroup to set.
        Returns:
        This builder for chaining.

      • clearNodeGroup

        public ListNodesNodeGroupsRequest.Builder clearNodeGroup()
         Name of the NodeGroup resource whose nodes you want to list.
        string node_group = 469958146 [(.google.api.field_behavior) = REQUIRED];
        Returns:
        This builder for chaining.

      • setNodeGroupBytes

        public ListNodesNodeGroupsRequest.Builder setNodeGroupBytes​(com.google.protobuf.ByteString value)
         Name of the NodeGroup resource whose nodes you want to list.
        string node_group = 469958146 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The bytes for nodeGroup to set.
        Returns:
        This builder for chaining.

      • hasOrderBy

        public boolean hasOrderBy()
         Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
        optional string order_by = 160562920;
        Specified by:
        hasOrderBy in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        Whether the orderBy field is set.

      • getOrderBy

        public String getOrderBy()
         Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
        optional string order_by = 160562920;
        Specified by:
        getOrderBy in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The orderBy.

      • getOrderByBytes

        public com.google.protobuf.ByteString getOrderByBytes()
         Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
        optional string order_by = 160562920;
        Specified by:
        getOrderByBytes in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The bytes for orderBy.

      • setOrderBy

        public ListNodesNodeGroupsRequest.Builder setOrderBy​(String value)
         Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
        optional string order_by = 160562920;
        Parameters:
        value - The orderBy to set.
        Returns:
        This builder for chaining.

      • clearOrderBy

        public ListNodesNodeGroupsRequest.Builder clearOrderBy()
         Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
        optional string order_by = 160562920;
        Returns:
        This builder for chaining.

      • setOrderByBytes

        public ListNodesNodeGroupsRequest.Builder setOrderByBytes​(com.google.protobuf.ByteString value)
         Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
        optional string order_by = 160562920;
        Parameters:
        value - The bytes for orderBy to set.
        Returns:
        This builder for chaining.

      • hasPageToken

        public boolean hasPageToken()
         Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
        optional string page_token = 19994697;
        Specified by:
        hasPageToken in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        Whether the pageToken field is set.

      • getPageToken

        public String getPageToken()
         Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
        optional string page_token = 19994697;
        Specified by:
        getPageToken in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The pageToken.

      • getPageTokenBytes

        public com.google.protobuf.ByteString getPageTokenBytes()
         Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
        optional string page_token = 19994697;
        Specified by:
        getPageTokenBytes in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The bytes for pageToken.

      • setPageToken

        public ListNodesNodeGroupsRequest.Builder setPageToken​(String value)
         Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
        optional string page_token = 19994697;
        Parameters:
        value - The pageToken to set.
        Returns:
        This builder for chaining.

      • clearPageToken

        public ListNodesNodeGroupsRequest.Builder clearPageToken()
         Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
        optional string page_token = 19994697;
        Returns:
        This builder for chaining.

      • setPageTokenBytes

        public ListNodesNodeGroupsRequest.Builder setPageTokenBytes​(com.google.protobuf.ByteString value)
         Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
        optional string page_token = 19994697;
        Parameters:
        value - The bytes for pageToken to set.
        Returns:
        This builder for chaining.

      • getProjectBytes

        public com.google.protobuf.ByteString getProjectBytes()
         Project ID for this request.
        string project = 227560217 [(.google.api.field_behavior) = REQUIRED];
        Specified by:
        getProjectBytes in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The bytes for project.

      • setProject

        public ListNodesNodeGroupsRequest.Builder setProject​(String value)
         Project ID for this request.
        string project = 227560217 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The project to set.
        Returns:
        This builder for chaining.

      • clearProject

        public ListNodesNodeGroupsRequest.Builder clearProject()
         Project ID for this request.
        string project = 227560217 [(.google.api.field_behavior) = REQUIRED];
        Returns:
        This builder for chaining.

      • setProjectBytes

        public ListNodesNodeGroupsRequest.Builder setProjectBytes​(com.google.protobuf.ByteString value)
         Project ID for this request.
        string project = 227560217 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The bytes for project to set.
        Returns:
        This builder for chaining.

      • hasReturnPartialSuccess

        public boolean hasReturnPartialSuccess()
         Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
        optional bool return_partial_success = 517198390;
        Specified by:
        hasReturnPartialSuccess in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        Whether the returnPartialSuccess field is set.

      • getReturnPartialSuccess

        public boolean getReturnPartialSuccess()
         Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
        optional bool return_partial_success = 517198390;
        Specified by:
        getReturnPartialSuccess in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The returnPartialSuccess.

      • setReturnPartialSuccess

        public ListNodesNodeGroupsRequest.Builder setReturnPartialSuccess​(boolean value)
         Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
        optional bool return_partial_success = 517198390;
        Parameters:
        value - The returnPartialSuccess to set.
        Returns:
        This builder for chaining.

      • clearReturnPartialSuccess

        public ListNodesNodeGroupsRequest.Builder clearReturnPartialSuccess()
         Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
        optional bool return_partial_success = 517198390;
        Returns:
        This builder for chaining.

      • getZoneBytes

        public com.google.protobuf.ByteString getZoneBytes()
         The name of the zone for this request.
        string zone = 3744684 [(.google.api.field_behavior) = REQUIRED];
        Specified by:
        getZoneBytes in interface ListNodesNodeGroupsRequestOrBuilder
        Returns:
        The bytes for zone.

      • setZone

        public ListNodesNodeGroupsRequest.Builder setZone​(String value)
         The name of the zone for this request.
        string zone = 3744684 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The zone to set.
        Returns:
        This builder for chaining.

      • clearZone

        public ListNodesNodeGroupsRequest.Builder clearZone()
         The name of the zone for this request.
        string zone = 3744684 [(.google.api.field_behavior) = REQUIRED];
        Returns:
        This builder for chaining.

      • setZoneBytes

        public ListNodesNodeGroupsRequest.Builder setZoneBytes​(com.google.protobuf.ByteString value)
         The name of the zone for this request.
        string zone = 3744684 [(.google.api.field_behavior) = REQUIRED];
        Parameters:
        value - The bytes for zone to set.
        Returns:
        This builder for chaining.

      • setUnknownFields

        public final ListNodesNodeGroupsRequest.Builder setUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        setUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        setUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<ListNodesNodeGroupsRequest.Builder>

      • mergeUnknownFields

        public final ListNodesNodeGroupsRequest.Builder mergeUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        mergeUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<ListNodesNodeGroupsRequest.Builder>